Milled parts / Aluminium parts / Laser parts

Z 697-114 V-Rod Air Ride System Legend Air

This pneumatic shock absorber can be adjusted in height by up to 10 cm, depending on the vehicle, via an electric compressor, both when stationary and while riding.High riding comfort without visual compromises.At the push of a button: maximum lowering for the show or ground clearance for tight corners.Kit ready to fit / black

€2,514.00*

Z 50622 Brake and Clutch Master Cylinder Cover

Z 50622 brake and clutch master cylinder cover "Iron Cross" from 071 set, black aluminium

€420.00*

Z 50602 Brake and Clutch Master Cylinder Cover

1 set, black

€370.80*

Z 21032 V-Rod CNC Design Hand Levers "Shorty" from 07

Short versionPolished aluminium

€334.80*

Z 21022 V-Rod CNC Design Hand Levers from 07

Polished aluminium

€334.80*

Z 21012 V-Rod CNC Design Hand Levers 02-06

CNC hand levers for V-Rod, Softail, DynaBlack and polished (please always state the model year)

€334.80*

VR 420/B Rear Indicator Bracket

Rear indicator brackets, pairBlack aluminiumFor all HD models

€114.00*

FR 430 NLC Handlebar Ends "Pyramid"

For all 1-inch handlebarsBlack aluminium

€66.00*

T 8081h Air Ride System Rear from 2014

The air ride system is installed using the original mounting points.Please state the model year when ordering

€2,172.00*

T 8081 Air Ride System Front from 2014

The front air ride system is installed in the original fork.Please state the model year when ordering.Air ride system front, from 2014

€2,064.00*

T 8080h Air Ride System Rear 2009-2013

The air ride system is installed using the original mounting points.Please state the model year when ordering.Air ride system rear, 2009-2013

€2,172.00*

T 8080 Air Ride System Front 09-13

The front air ride system is installed in the original fork.Please state the model year when ordering.Air ride system front, 09-13

€2,064.00*

F CS008 Electric Centre Stand

The electric centre stand can only be used in combination with a rear air ride system.The shock absorber cross-connection must be modified.

€1,626.00*

T 5141 NLC Road King Passenger Floorboards, Design "Hole"

Road King passenger floorboards, "Hole" design

€478.80*

T 5140 NLC Road King Passenger Floorboards, Design "Cut"

Road King passenger floorboards, "Cut" design

€478.80*

T 5131 NLC Street Glide Passenger Footpegs, Design "Hole"

Street Glide passenger footpegs, "Hole" design

€358.80*

T 5130 NLC Street Glide Passenger Footpegs, Design "Cut"

Street Glide passenger footpegs, "Cut" design

€358.80*

T 5032 NLC Design Floorboards "Gothic"

Floorboards for all Slim and Fat Boy modelsOn request we can make the lettering to your specificationsBare aluminium

€720.00*

T 5031 NLC Design Floorboards "Hole"

Floorboards for all Slim and Fat Boy modelsBare aluminium

€586.80*

T 5030 NLC Design Floorboards "Cut"

Floorboards for all Slim and Fat Boy modelsBare aluminium

€586.80*

T 8015 NLC Bolt-On Neck Kit MY 2014 and Later, 30 Inch

For MY 2014 and later, 30 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,850.00*

T 8014 NLC Bolt-On Neck Kit MY 09-13, 30 Inch

For MY 09-13, 30 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,700.00*

T 8013 NLC Bolt-On Neck Kit MY 97-08, 30 Inch

For MY 97-08, 30 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,466.00*

T 8012 NLC Bolt-On Neck Kit MY 2014 and Later, 26 Inch

For MY 2014 and later, 26 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,850.00*

T 8011 NLC Bolt-On Neck Kit MY 09-13, 26 Inch

For MY 09-13, 26 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,700.00*

T 8010 NLC Bolt-On Neck Kit MY 97-08, 26 Inch

For MY 97-08, 26 inchWith the bolt-on neck kit, no frame cutting is required to run large wheels such as 26 or 30 inch.Our kit stands out with easy installation, 100% precise fit and an exceptional design.From model year 2014, a new wheel bearing responsible for the ABS function is required. This is included in the scope of delivery of our bolt-on neck kit.

€2,470.80*

T 630 NLC Design Horn Cover

Horn cover incl. new horn

€330.00*

T 620 NLC Design Clutch Cover

Clutch cover for 5-speed gearbox

€336.00*

T 610 NLC Design Crankcase Cover

CNC aluminium crankcase cover

€526.80*

T 600 NLC Design Primary Cover

CNC aluminium primary cover

€1,788.00*

T 210 Aluminium Cover for Fuel Cap

Polished or black Contrast Cut, as preferred

€346.80*

ST 50202 / 50203 NLC Triple Clamp Breakout with Cover

NLC triple clamp with coverPolished or black finish

€1,068.00*

ST 50192 / 50193 NLC Triple Clamp Breakout

NLC triple clamp Breakout

€990.00*

ST 5130 NLC Replacement Footpegs Softail / Dyna

Replacement footpegs, bare aluminium

€298.80*

ST 5032 NLC Design Floorboards "Gothic"

Floorboards for all Slim and Fat Boy modelsOn request we can make the lettering to your specificationsBare aluminium

€720.00*

ST 5031 NLC Design Floorboards "Hole"

Floorboards for all Slim and Fat Boy modelsBare aluminium

€586.80*

ST 5030 NLC Design Floorboards "Cut"

Floorboards for all Slim and Fat Boy modelsBare aluminium

€586.80*

ST 630 NLC Design Horn Cover

Horn cover incl. new horn

€330.00*

ST 621 NLC Design Clutch Cover from 14

For 6-speed gearbox, polished aluminium

€370.80*

ST 620 NLC Design Clutch Cover 09-13

Clutch cover for 5-speed gearbox

€370.80*

ST 610 NLC Design Crankcase Cover

CNC aluminium crankcase cover

€526.80*

ST 600 NLC Design Primary Cover

CNC aluminium primary cover

€1,788.00*

Z 60270 License Plate Holder

Z 60270 license plate holder for single-sided swingarm (GP-1 and Monza)Bare aluminium

€358.80*

Z 60261 License Plate Holder for NLC Design Swingarm

Z 60261 license plate holder for NLC design swingarmBare aluminium

€226.80*

VR 60171 Drive Side Brake System 4-Piston

VR 60171 drive side brake system, 4-piston, for all NLC design swingarms

€1,428.00*

Z 60251 License Plate Holder for V-Rod Original Swingarm

Z 60251 license plate holder for V-Rod original swingarm

€226.80*

VR 3002/1 V-Rod Aluminium Design Swingarm "Classic"

Scope of delivery includes axles, bearings, mounting kit and TÜV certificateBare aluminium. Please state the model year when ordering

€2,148.00*

VR 3001/1 V-Rod Aluminium Design Swingarm "Cut Out"

The "Cut Out" swingarm kit is available for all V-Rod, Muscle and Street Rod models.Scope of delivery includes axles, bearings, mounting kit and TÜV certificate.Bare aluminium. Please state the model year when ordering

€1,944.00*

VR 3000/1 V-Rod Aluminium Design Swingarm "Clean Dream"

The "Clean Dream" swingarm kit is available for all V-Rod, Muscle and Street Rod models.Scope of delivery includes axles, bearings, mounting kit and TÜV certificateBare aluminium. Please state the model year when ordering

€1,908.00*

VR 20220 Offset Kit V-Rod 12.5"

The bearing support plate is a MUST for every wide tyre conversion.The original pulley continues to be used.Please state the model year when orderingBare aluminium

€756.00*

VR 20210 Offset Kit V-Rod 11.5"

The bearing support plate is a MUST for every wide tyre conversion.The original pulley continues to be used.Please state the model year when orderingBare aluminium

€708.00*

VR 20200 Offset Kit V-Rod 10.5"

The bearing support plate is a MUST for every wide tyre conversion.The original pulley continues to be used.Please state the model year when orderingBare aluminium

€660.00*

DS 3011/1 V-Rod Aluminium Single-Sided Swingarm Kit "GP-1" from MY 07

Scope of delivery includes axles, bearings, air ride system, fuel tank and mounting kit

€10,020.00*

DS 3010/1 V-Rod Aluminium Single-Sided Swingarm Kit "Monza" from MY 07

Scope of delivery includes axles, bearings, air ride system, fuel tank and mounting kit

€9,840.00*

DS 3002/1 V-Rod Aluminium Design Swingarm Kit

DS 3002/1 V-Rod aluminium design swingarm kit Classic "down shock" from MY 07Scope of delivery includes axles, bearings, air ride system, fuel tank and mounting kit

€6,360.00*

DS 3001/1 V-Rod Aluminium Design Swingarm Kit

DS 3001/1 V-Rod aluminium design swingarm kit Cut Out "down shock" from MY 07Scope of delivery includes axles, bearings, air ride system, fuel tank and mounting kit

€6,156.00*

DS 3000/1 V-Rod Aluminium Design Swingarm Kit

DS 3000/1 V-Rod aluminium design swingarm kit Clean Dream "down shock" from MY 07Scope of delivery includes axles, bearings, air ride system, fuel tank and mounting kit

€6,120.00*

Z 70161 Brake Caliper Adapter for 3D Fork

Fits NLC 3D fork VR 50211Bare aluminium or black

€276.00*

Z 50201 V-Rod 3D Riser

Fits all NLC 3D triple clamps 290 mm

€562.80*

Z 50101 3D Headlight Bracket

3D headlight bracketFits all NLC 3D triple clamps 290 mm and V-Rod OEM headlights

€354.00*

Z 07025 NLC Handlebar Breakout Contrast Cut

NLC handlebar Breakout Contrast CutContrast Cut finish

€1,584.00*

Z 07024 NLC Handlebar Breakout

NLC handlebar Breakout, polished

€1,440.00*

VR 50231 V-Rod 3D Fork Monza

V-Rod 3D fork "Monza"3D fork, bare, with cover tubes and axleLength 750 mm, rake 3°, for radial brake calipers 108 mmScope of delivery without risers and without brake calipers

€4,608.00*

VR 50241 V-Rod 3D Fork GP-1

3D fork, scope of delivery with clip-on handlebars,without headlight, brake calipers and brake caliper adapter.Length 750 mm, rake 3°, for radial brake calipers 108 mm

€5,040.00*

VR 50231 3D Riser Universal 40 mm

NLC 3D design riser, universal fit for all handlebars with 25.4 mm diameter. Black or polished

€252.00*

VR 50221 3D Riser Universal 30 mm

NLC 3D design riser, universal fit for all handlebars with 25.4 mm diameter. Black or polished

€222.00*

VR 50211 V-Rod 3D Fork

3D fork, bare. Scope of delivery without headlight, risers and brake caliper adapter.Length 800 mm, rake 3°. The OEM brake calipers can be used with an adapter

€3,408.00*