Rear Fender Plug & Play

VM-219 Victory Gunner / Highball Side Cover Right

VM-219 side cover right, unpainted, for Victory Gunner / Highball etc. models! Please provide your VIN when ordering!

€254.00*

VD-608 Wheel Rim Conversion 260 for Victory Gunner / Highball etc.

VD-608 wheel rim conversion to 260 width. Rim welded on / respoked, incl. RAL paint finish; the rim runs without offset in the swingarm. Special paint finish of the rim possible, other rim surface finishes available. Price on request, for Victory Highball / Gunner / Judge etc. Please provide your VIN when ordering!

€0.00*

VH-2079 Solo Seat (Small) Complete for Various Victory Models

VH-2079 solo seat (small) incl. side covers left and right! Incl. special battery! Incl. battery box! Unpainted, padded seat pan at extra charge, for Victory Highball / Gunner / Vegas etc. Please provide your VIN when ordering! Please check the clearance between the drive belt and the fiberglass part; in rare cases some adjustment may be needed.The side covers left and right must be adjusted to fit!

€1,632.00*

VM-216 Belt Cover Custom

VM-216 Belt Cover, Black powder-coated, plug & play installation. Please provide your vehicle identification number!

€118.80*

VA-953 Header System 2-2 for All Victory Models

VA-953 complete header system 2-2, natural stainless steel, surface finish at extra charge, for various Victory models. Catalytic converter insert at an extra charge of 120 euros. Please provide your VIN when ordering!

€1,320.00*

VD-607 Wheel Rim Conversion 300 Victory Highball / Gunner / Judge

VD-607 Wheel rim alteration on 300 tire, forged, individual powder coated coloring, incl. rear pulley distance. Centered wheel rim. For tyres Metzeler 300/35 VR 18. Price on request. For VictoryHighball / Gunner / Judge etc. Please provide your vehicle identification number!

€0.00*

VF-805 Linkage Rods for Rear Lowering 2-3 cm

VF-805 Lowering kit, height adjustment (-2-3 cm), 2-piece-set for plug & play installation. For all Victory types. Please provide your vehicle identification number!

€234.00*

VF-804 Linkage Rods for Rear Raising +2-3 cm

VF-804 Height adjustment (+2-3 cm), 2-piece-set for plug & play installation. For an optimal cornering driving. Please provide your vehicle identification number!

€234.00*

VM-215 Extended Side Cover for Solo Seat (Large)

VM-215 Side Cover long, right, for solo seat. Covering the suspension strut, unpainted, for Victory Highball / Gunner / Judge etc. Please provide your vehicle identification number!

€254.00*

VM-214 Extended Side Cover for Solo Seat (Small) for All Victory Models

VM-214 extended side cover, left and right, for VH-2078 solo seat (small), unpainted. Please provide your VIN! Padded seat pan at extra charge. For Victory Highball / Gunner / Judge

€254.00*

VH-2078 Solo Seat (Small)

VH-2078 Solo seat small, incl. side covers (left/right), battery-box and battery, unpainted. Seat cushion is not included but available at extra charge. For all Victory types. Please provide your vehicle identification number!

€876.00*

VSI-2057 Seat Cushion for Big-Bike Victory Fender

VSI-2057 Seat cushion Victory Big-Bike, fender VH-2057 incl. mounting hardware. Please provide your VIN number!

€246.00*

VSI-2055 Seat Cushion for Big-Bike Victory Fender

VSI-2055 Seat cushion Victory Big-Bike, fender VH-2055 incl. mounting hardware. Please provide your VIN number!

€246.00*

VSI-2052 Seat Cushion for Big-Bike Victory Fender

VSI-2052 Seat cushion Victory Big-Bike, fender VH-2052 incl. mounting hardware. Please provide your VIN number!

€246.00*

VSI-2066 Seat Cushion for Big-Bike Victory Fender

VSI-2066 Seat cushion Victory Big-Bike, fender VH-2066, VH-2056 incl. mounting hardware. Please provide your VIN number!

€246.00*

VSI-2062 Seat Cushion for Big-Bike Victory Fender

<p>VSI-2062 Seat cushion Victory Big-Bike, fender VH-2062, VH-2058, VH-2059, VH-2060, VH-2061, VH-2077 incl. mounting hardware. Please provide your VIN number!</p>

€246.00*

VSI-2050 Seat Cushion for Big-Bike Victory Fender

VSI-2050 Seat cushion Victory Big-Bike, fender VH-2050, VH-2051, VH-2072 incl. mounting hardware. Please provide your VIN number!

€246.00*

VH-2077 Rear Fender Kit 160-240

VH-2077 Rear Fender Kit for 160-240 tires. Gel-coated fiberglass, unpainted. Without visible screw connections. Please order the side covers left and right separately. Seat cushion is not included but available at extra charge. For original tail light (tail light is not included). For Victory Gunner / Highball etc. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€750.00*

VH-2076 Swingarm Fender 160-200

VH-2076 Rear fender for 160-200 tyres. Without back light, gel-coated fiberglass, unpainted. For Victory Gunner / Highball / Judge etc. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€498.00*

VH-2068 Solo Seat Large

VH-2068 Solo seat wide, side covers (left/right) have to be ordered separately. Incl. tail light, unpainted. Seat cushion is not included but available at extra charge. For Victory Highball / Gunner / Judge etc. Please provide your vehicle identification number!

€876.00*

VH-2074 Fender Original Look 210-240 (V2)

VH-2074 Rear fender original fit for 210-240 tyres. For original back light without changes on the fender strut. Without back light, unpainted. For Victory Gunner / Highball/ Judge etc. Please provide your VIN number!

€444.00*

VH-2073 Rear Fender Original Look

VH-2073 Rear Fender Original Fit. Short, without tail light, unpainted. Without changes on the fender strut. For Victory Gunner / Highball / Judge etc. Please provide your VIN number!

€396.00*

VH-2070 Long Fender Rear V2

VH-2070 Long fender rear, version 2. Without changes on the fender strut. Without back light, unpainted. For Victory Gunner / Highball/ Judge etc. Please provide your VIN number!

€606.00*

VH-2075 Swingarm-Mounted Fender 240-260

VH-2075 Rear fender for 240-260 tyres. Without back light, gel-coated fiberglass, unpainted. For Victory Gunner / Highball / Judge etc. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€570.00*

VH-2066 Rear Fender Kit 300

VH-2056 Rear Fender Kit for 300 tires. Gel-coated fiberglass, unpainted. Without visible screw connections. Please order the side covers left and right separately. Seat cushion is not included but available at extra charge. For original tail light (tail light is not included). For Victory Gunner / Highball etc. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€786.00*

VH-2067 Long Fender Rear Version 1

VH-2067 Long fender rear V 1, for original back light without changes on the fender strut. Without back light, unpainted. For Victory Gunner / Highball/ Judge etc. Please provide your VIN number!

€606.00*

VH-2065 Fender Original Look 210-240 (V1)

VH-2065 Fender original fit, big, for 210-240 tires (V1), for original back light without changes on the fender strut. Unpainted. For Victory Gunner / Highball etc. Please provide your VIN number!

€450.00*

VH-2064 Fender Original Look, Short

VH-2064 Fender original fit, short, without back light. For 160-200 tires. Unpainted. For Victory Gunner / Highball etc. Please provide your VIN number!

€396.00*

VH-2072 Rear Fender Kit 210-240

VH-2050 Rear fender kit 210-240. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory Highball / Gunner / Vegas etc. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,434.00*

VF-810 Air Ride Kit

VF-810 Airride kit, unpainted. Mounting hardware including compressor, air tube, manometer. For Victory Hammer / 8 Ball / Gunner / Highball / Vegas / Jackpot etc. Please provide your VIN number!

€2,154.00*

VM-209 Engine Cable Cover

VM-209 Engine cover, rear. Mounting hardware included, unpainted. For Victory Hammer / 8 Ball / Gunner / Highball / Vegas / Jackpot etc. With or without lambda sensor cut. Please provide your VIN number!

€201.60*

VM-207 Open Pulley Cover

VM-207 Sprocket cover "naked", unpainted. For all Victory types, 6-parts-set, mounting hardware included. Please provide your VIN number!!

€234.00*

VM-208 Open Pulley Cover

VM-208 Sprocket cover "naked", unpainted. For all Victory types, 6-parts-set, mounting hardware included. Please provide your VIN number!

€234.00*

VM-204 Pulley Cover with Angular Cut-Outs

VM-204 Sprocket cover, edged cut-outs, meshing included but not installed, unpainted. For Victory hammer S / 8 Ball / Vegas / Jackpot / Gunner / Highball etc. Please provide your VIN number!

€174.00*

VF-801 Side-Mount License Plate Bracket

VF-801 Sideward license plate bracket, powder-coated black, internal cable routing. For Victory hammer S / 8 Ball / Vegas / Gunner / Highball / Jackpot etc. Please provide your VIN number!

€348.00*

VL-350 Special Steering Head Bearing, Top

VL-350 Custom steering head bearing, top. Alteration of standard bearing to precise fit. For Victory hammer S / 8 Ball / Gunner / Highball / Vegas / Jackpot etc. Please provide your VIN number !

€222.00*

VA-951 Exhaust Heat Wrap

VA-951 Heat protection tape for exhaust system. Please provide your VIN number!

€114.00*

VH-2061 Solo Seat (without Fender)

VH-2061 Solo Seat without fender. Incl. back light, gel-coated fiberglass, unpainted. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€876.00*

VH-2063 Swingarm-Mounted Fender (Hugger) Only for 300 Tyre

VH-2063 Rear Fender / Hugger for 300 tires (without seat). Gel-coated fiberglass, unpainted. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€612.00*

VH-2062 Swingarm-Mounted Fender (Hugger) Only for 250-260 Tyre

VH-2062 Rear Fender / Hugger for 250-260 tires (without seat). Gel-coated fiberglass, unpainted. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€570.00*

VH-2060 Swingarm-Mounted Fender (Hugger) incl. Solo Seat for 300 Tyre

VH-2060 Solo Seat with Rear Fender / Hugger for 300 tires. Incl. back light, gel-coated fiberglass, unpainted. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,368.00*

VH-2059 Swingarm-Mounted Fender (Hugger) with Solo Seat for 250-260 Tyre

VH-2059 Solo Seat with Rear Fender / Hugger for 250-260 tires. Incl. back light, gel-coated fiberglass, unpainted. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,332.00*

VH-2058 Rear Fender Kit 250-260

VH-2058 Rear fender kit 250-260. For original back light, not included in delivery. No visible screw connections on the fender. Gel-coated fiberglass, unpainted. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€750.00*

VH-2056 Rear Fender Kit 300

VH-2056 Rear fender kit 300. For original back light, not included in delivery. No visible screw connections on the fender. Gel-coated fiberglass, unpainted. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€786.00*

VH-2057 Rear Fender Kit Custom Round 250-300

VH-2057 Rear fender kit Custom round 250-300. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,458.00*

VH-2055 Rear Fender Kit 250-300

VH-2051 Rear fender kit 250-300. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M 8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,458.00*

VH-2052 Rear Fender Kit Custom 250/300

VH-2052 Rear fender kit Custom 250-300. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,632.00*

VH-2051 Rear Fender Kit 300

VH-2051 Rear fender kit 300. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,458.00*

VD-600 Wheel Rim Conversion for 300 Tyre

VD-600 Wheel rim alteration on 300 tire, forged, individual powder coated coloring, incl. rear pulley distance. Centered wheel rim. For tyres Metzeler 300/35 VR 18. Please provide your vehicle identification number!

€0.00*

VH-2050 Rear Fender Kit 250

VH-2050 Rear fender kit 250. Gel-coated fiberglass, unpainted, incl. side covers, back light, battery-box and battery. Seat cushion is not included but available at extra charge. For Victory hammer S / Eight Ball. Please take into consideration that a M8 thread might have to be tapped on some older types. Please also check the distance between the belt and the rear fender. Please provide your vehicle identification number!

€1,434.00*

Filter products

Rear Fender Plug & Play